SP HYLIS HM 68

SP HYLIS HM 68 are recommended for the following devices: is a multi-purpose hydraulic oil suitable for various industrial applications such as vane pump systems, gearboxes, pistons, plastic injection molding machines, presses, industrial circulation systems, and marine hydraulic equipment.

SP HYLIS HM 68 exceed the requirements of:

• DIN 51524 Part II
• DIN 51524 Part 2 HLP
• ASTM D6158 HM
• Denison Parker HF-0, HF-1, HF-2
• Eaton Vickers M-2950-S & I-268-S3
• MAG Cincinnati P Series
• JCMAS HK P041
• ANSI/AGMA 9005-E02-RO
• Bosch Rexroth RE 07075 & 90220
• SEB 181222
• FZG 11

STORAGE: Storage temperature: Less than 60^oC. Avoid direct sunlight. Keep away from heat sources and sources of ignition, avoid water contamination, and do not mix with other oils

ENVIRONMENT, HEALTH & SAFETY:

• Health & safety: SP HYLIS HM 68 does not pose any significant health hazard when used according to instructions and in compliance with personal and industrial hygiene standards. Avoid contact with skin. Use impermeable gloves with used oil. If skin contact occurs, wash immediately with soap and water.
• Protect the environment: Collect used oil to designated collection points. Do not discharge into sewers, ground or water sources. Guidance on Health and Safety in available on the appropriate Material Safety Data Sheet (MSDS), which can be obtained from http://www.apsaigonpetro.com

ADDITIONAL INFORMATION:

• Pump compatible: SP HYLIS HM 68 is compatible with most hydraulic pumps except those constructed in silver or silver plated.
• Compatibility with oils: SP HYLIS HM 68 is compatible with most other mineral-based hydraulic oils. However, it is important to note that it should not be mixed with environmentally friendly hydraulic oils (high biodegradability) or fire-resistant hydraulic oils. For hydraulic applications requiring high precision operation over a wide ambient temperature range, SP HYLIS AV or SP HYLIS HV is recommended.
• Compatibility with paint, gaskets, and seals: SP HYLIS HM 68 is compatible with common gaskets, seals, and paint materials used for mineral-based oils.
• TECHINCAL ASSISTANCE: For more information, visit our website www.apsaigonpetro.com. Hotline: 1900 0104

BENEFITS:

• Excellent high oxidation stability
• Excellent anti-corrosion and anti-wear properties
• Excellent anti-rust
• Has good filtering ability
• Enhance anti-foaming properties
• Outstanding protection against wear, rust and corrosion.

                                                  *Minor variations in product typical test data are to be excepted in normal manufacturing