So what is a lack of steering?
Lack of steering is the phenomenon where cars lose control of steering when entering a corner, because the front or rear wheels slip, so the vehicle loses the ability to stick to the road surface, causing the car to not follow the direction following the remote control. the doctor's mausoleum. The phenomenon is common in front-wheel drive and 4-wheel drive vehicles.
Especially when the car turns too fast, the driver steers a lot, but the car turns/turns very slowly, the cornering trajectory will not be as expected, leading to a lot of danger because the car will deflect, easy swerve into the next lane or out of the way.
Cause the car is understaffed?
The main reason is that the front wheel has slipped, no longer able to grip the road, causing the front of the car to deviate from the roundabout trajectory or because the driver is driving at a fast speed, so when cornering, the car continues to move in a straight direction without following the curve. driver's curve.
How to handle when the car is understaffed
The best way to handle it is to immediately release the accelerator, hit the steering wheel in the direction of the steering wheel (opposite the direction of cornering), press the brake lightly if the vehicle is equipped with an ABS to reduce the vehicle speed. slippery, and at the same time reduce the force of mindfulness. It is not advisable to brake suddenly in this case because it will be easy to cause the car to lock in the brake and make the front two wheels return to a state of loss of grip with the road surface, even more dangerous.
So what is overdrive?
Oversteering or oversteering is a phenomenon where steering is not much, but the vehicle turns/turns too quickly and suddenly, causing the vehicle to turn sideways and cause the vehicle to overturn. Vehicles often over-steer when suddenly applying the accelerator or releasing the accelerator or braking sharply when cornering.
Oversteer is the phenomenon of not much steering but the car turns/turns too quickly and suddenly
The reason why the car is in overdrive
When cornering, the rear wheel slips and loses traction, at this time the wheel will slide straight to the old trajectory, while the front wheel is changing direction according to the control from the steering wheel. This causes the front of the car to turn/turn, while the rear of the car is still sliding straight, and the front and rear of the car are not moving in the same direction.
How to handle when the car is in overdrive
To control the phenomenon of oversteer is not easy, it is necessary to steer the steering wheel in the opposite direction of the cornering car, gently press the accelerator, reduce the speed before the brake acts on the rear wheels regain traction.
How to prevent under-/over-drive cars?
To avoid the phenomenon of under-driving and over-driving cars, it is necessary to note some of the following experiences:
If the tires are too worn and the tire pressure is not up to the standard, the car will easily lose grip when cornering at high speed or encountering slippery roads.
When moving on rainy, wet, muddy roads, etc., it is necessary to actively slow down, do not turn at a speed too fast, or take a corner too quickly.
When moving on a slippery road, you should slow down, absolutely keep control, avoid sudden braking or stopping or pressing the accelerator suddenly when turning, dangerous loss of control may occur due to the sudden weight shift between the front and rear of the car.
In addition, for the steering system to work properly, it is recommended to check and maintain the steering system periodically and need to fix it immediately if there is a problem!
Check out high-quality car lubricants here.
