Dimming the instrument cluster and infotainment system
In low light, your eyes are usually more sensitive to brighter light sources. Light sources from the instrument panel and infotainment system can distract you or be dazzled, potentially distracting the driver.
In addition, people who wear glasses often experience glare when observing at a wrong angle, which will lead to some glare in their vision. Therefore, drivers should reduce the brightness of the above systems so that they can focus on observing the road.
Do not look fixedly at oncoming headlights
Just like looking directly at the sun, looking directly at the oncoming headlights is not only harmful to the eyes, but also makes it impossible for the eyes to see the road ahead. Especially on the road without lights around, looking directly at the headlights of other vehicles will strain the eyes and distract, leading to many dangers.
Adjust the rearview mirror accordingly
Glare is one of the major causes of distraction at night, the light from the headlights of the car behind is reflected through the mirror, shining directly into the driver's eyes, making the eyes lose their ability to see and this phenomenon persists. long continues for a few seconds after the light source disappears, don't ignore it because this ticking time is enough for the worst to happen.
The driver also needs to adjust the rearview mirror to cover the view and not be glared by the light reflected from other cars. With the rearview mirror on both sides, depending on the stature and observation angle, the driver should adjust so that he can see the left and right corner behind the car. With the inside rearview mirror of the car, if the cars behind come close and turn on the headlights to reflect through the mirror, causing glare, the driver should turn the small lever behind the mirror to make the mirror switch to anti-glare mode.
Clean glass surfaces
The driver should also pay attention to the cleaning of the front and rear windshield system as well as the side window glass to ensure visibility when driving at night. When washing the glass, the driver should also use specialized water and do not leave glass cleaning streaks on the surface. Turn on the wiper switch, when this system works, if it detects that the wiper is not clean in the driver's field of view, the wiper blade should be cleaned. Do not use detergents such as washing powder to clean the wiper because it can cause deterioration of the rubber blade. After cleaning, if you still see streaks on the glass, the driver should replace the wiper.
Check the lighting system
Lights are considered essential observation devices at night as well as when traveling in adverse weather conditions. Incidents such as burning bulbs, dim lights or light angle deviations... always make it difficult for drivers to control cars at night. Therefore, before each trip, drivers should take time to check the operation of the lighting system. Therefore, the driver should have in the car a spare bulb as well as a tool to replace it, in case the light suddenly burns out while in traffic. For vehicles that do not support the function of automatically adjusting the beam angle of the headlights, the driver should pay attention to re-align the beam angle to ensure visibility.
In addition, you should step on the brake and ask a support person to observe to check the operation of the brake light system. If damage is detected or one of the brake lights does not light up, take the vehicle to the garage to have it replaced immediately. Because if the brake light does not work, it is easy to lead to a rear-end collision when driving at night.
Check out high-quality car lubricants here.
